ROLLTECH g02/09
The ROLLTECH g02/09 filling machine allows the application of low and medium viscosity UV or water-base fillers and putty on all flat surfaces. Roller conveyor system, with central back-up roller. […]
ROLLTECH G21/55 FLEXY
ROLLTECH G21-55 FLEXY is a two-head roller coater with one direct application unit and one direct or reverse application unit. Flexi Roll technology is Giardina Group ‘s answer to the […]
SPRAYTECH cs Spray
The SPRAYTECH cs painting booth is an ideal working environment for the manual finishing of various types of artefacts. Pigments are captured by two vertical filtration stages. Available in different […]
UVTECH gst
The UVTECH gst ovens is used to cure finishing products on all types of flat or shaped support. Designed in modular form, our ovens are powered by continuous electronic control […]
UVTECH GST 1401/2 PLUS
The “Uvtech Gst 1401/2 Plus” oven is designed to achieve optimal polymerisation of painting products on all substrate types. It features a modular hood housing two irradiating units with highly […]
UVTECH gst Plus Albatros
The oven mod. UVTECH gst Plus Albatros is a special type of UV oven that uses the principle of cold radiation. Equipped with a system of filtration of the hot […]
WIPETECH g02/2p
This machine is designed and built to obtain a uniform distribution of paint on the substrate. It is the perfect solution in application of natural or UV oils on natural […]
WIPETECH g02/30s2
The WIPETECH g02/30s2 denibber is used in finishing lines after roller or spray applications to even out and correctly distribute the applied product (stain and oil). Depending on the brushes […]
WIPETECH g02/30s3
The WIPETECH g02/30s3 denibber is used in finishing lines after roller or spray applications to even out and correctly distribute the applied product (stain and oil). Depending on the brushes […]
