La “MVT 3000 (LVGT 1AT2SF)” is an automatic single-side edge sander in the “MVT” series, perfect for sanding MDF and chipboard panel edges coated with PU base or water-base products. This machine is designed to process kitchen doors, both matt and glossy, interior and external doors and many other furniture products.

THE AGGREGATES
“MVT 3000 (LVGT 1AT2SF)” is equipped with two “SF 150” aggregates, a superfinishing unit with two belts – one chevron belt and one sanding paper belt – for flat surfaces, with pneumatic adjustable pad to allow for the utmost possible flexibility and accuracy.
The machine is also fitted with a molded edge sanding unit “AT110”. The belt is 110 millimeter thick, with adjustable angle and interchangeable pad, to allow for the utmost possible processing flexibility.
The machine has a “PLC” (“Programmable Logic Controller”) as a general automation control unit and a dedicated “PLC” on each individual unit.
“MVT 3000 (LVGT 1AT2SF)” can process parts with minimum length 200 millimeters, 50 millimeters wide and 100 millimeters thick.

FRAME AND CONVEYOR
“MVT 3000 (LVGT 1AT2SF)” consists of a thick steel frame, designed to compensate vibrations and guarantee perfect stability even during the more demanding work phases.
The side guide keeps the part straight while running in the machine on a track – which runs on two interchangeable steel guides – with a steel chain, on which the pads covered in high-resistance rubber 80 mm wide are fixed. The motor power is 1.1 kW and the part running speed – electronically adjustable with inverter – can be set from 5 up to 25 meters per minute.

MACHINE TECHNICAL FEATURES
Workable sides: 1
Minimum part length: 200mm
Minimum part width: 50mm
Maximum part thickness: 100mm
Processing speed: from 5 to 25m/min
Conveyor motor power: 1.5kW
Worktop height: 900mm
Total installed power: 11 kW
Voltage: 400V
Machine length: 4,400mm
Machine width: 1,700mm
Machine height: 1,500mm
Part infeed-outfeed: manual

AGGREGATE TECHNICAL FEATURES
AT 110
Motor power: 2.2kW
Variable belt rotation speed: 0.5 to 11 m/s
Sanding belt oscillation motor: 35 W
Adjustable work angle: from -10 to +90 degrees
Pulley thickness: 110 mm
Sanding belt maximum size: 2,800 x 110h mm

“SF 150”
Work surface
: 100mm
Motor power: 3kW (4hp)
Variable belt rotation speed: 0.5 to 11m/s
Sanding belt oscillation motor: 0.37kW
Adjustable work angle: fixed 0degrees
Pulley thickness: 150mm
Sanding belt maximum size: 2,900 x 150h mm
Chevron belt size: 2,370 x 140h mm

AVAILABLE ACCESSORIES
Pneumatic blower to clean the parts with housing and spinning blowers with timed intervention inside.
Industry 4.0” Set up.

EDGES
“MVT 3000 (LVGT 1AT2SF)” can process the following types of edges:

Want to see the “Destefani MVT” in operation? Click here.


Subscribe to the Newsletter

Required field and valid format
Required field