Model “MVT 2000 (LVGT 2AT1SB)” is an automatic single-side edge sander in the “MVT” series, perfect for sanding MDF and chipboard panel edges coated with PU base or water-base products. This machine is designed to process kitchen doors, interior and external doors and many other furniture products.
THE AGGREGATES
“MVT 2000 (LVGT 2AT1SB)” is equipped with two “AT” and one “SB100” unit. The belt sanding units “AT” are suitable for sanding straight and molded edges. They are 110 millimeters thick, with adjustable angle and interchangeable pad, to allow for the utmost possible flexibility and perfect sanding in a contained time frame to optimize the production cycle.
The Scotch Brite (“SB100”) aggregate is an abrasive wheels for superfinishing, denibbing and brushing the sanded surfaces. The “SB100” aggregate operates on a useful thickness up to 100 millimeters with its 1.5 kW motor.
The machine has a “PLC” (“Programmable Logic Controller”) as a general automation control unit and a dedicated “PLC” on each individual unit.
Model “MVT 3000 (LVGT 2AT2SB)” is a variant of “MVT 2000 (LVGT 2AT1SB)”, with two Scotch Brite “SB100” aggregates. Owing to the additional “SB100” unit, the sanding is even more effective on the first run.
FRAME AND CONVEYOR
“MVT 2000 (LVGT 2AT1SB)” consists of a thick steel frame, designed to compensate vibrations and guarantee perfect stability even during the more demanding work phases.
The side guide keeps the part straight while running in the machine on a track – which runs on two interchangeable steel guides – with a steel chain, on which the pads covered in high-resistance rubber 80 mm wide are fixed. The motor power is 1.1 kW and the part running speed – electronically adjustable with inverter – can be set from 5 up to 25 meters per minute.
MACHINE TECHNICAL FEATURES “MVT 2000 (LVGT 2AT1SB)”
Workable sides: 1
Minimum part length: 200mm
Minimum part width: 50mm
Maximum part thickness: 100mm
Processing speed: from 5 to 25m/min
Conveyor motor power: 1.1kW
Worktop height: 900mm
Total installed power: 7 kW
Voltage: 400V
Machine length: 3,400mm
Machine width: 1.700mm
Machine height: 1.500mm
Part infeed-outfeed: manual
MACHINE TECHNICAL FEATURES “MVT 3000 (LVGT 2AT2SB)”
Workable sides: 1
Minimum part length: 200mm
Minimum part width: 50mm
Maximum part thickness: 100mm
Processing speed: from 5 to 25m/min
Conveyor motor power: 1.5kW
Worktop height: 900mm
Total installed power: 9 kW
Voltage: 400V
Machine length: 4,400mm
Machine width: 1,700mm
Machine height: 1,500mm
Part infeed-outfeed: manual
AGGREGATE TECHNICAL FEATURES
“AT 110”
Motor power: 2.2kW
Variable belt rotation speed: 0,5 to 11 m/s
Sanding belt oscillation motor: 35 W
Adjustable work angle: from -10 to +90 degrees
Pulley thickness: 110 mm
Sanding belt maximum size: 2,800 x 110h mm
“SB100”
Motor power: 1.5kW
Wheel size: 200x100mm
Suction port size: 100mm
Wheel rotation speed: between 420 and 1,720rpm
Wheel shaft: 30mm
Spindle-sanding wheel connection flange: 76mm
Adjustable work angle: from 0 to +90 degrees
AVAILABLE ACCESSORIES
Electropneumatic system with timed intervention on infeed and outfeed of the sanding aggregate, manageable from the touchscreen panel.
Bi-directional Electronic recovery system to compensate for the sanding wheel wear, controlled by the programmable logic, to compensate wear in all operating positions.
Pneumatic blower to clean the parts with housing and spinning blowers with timed intervention inside.
“Industry 4.0” Set up.
EDGES
“MVT 2000 (LVGT 2AT1SB)” and “MVT 2000 (LVGT 2AT2SB)” can process the following types of edges:
Want to see the “Destefani MVT” in operation? Click here.