1VE-300

The 1VE spray machine for moldings with one tank is designed to finish wood, plastic and metal profiles.
The removable tank allows easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.

Related Products


2VE-300

The 2VE spray machine for moldings with two tanks allows finishing of wood, plastic and metal profiles.
The two removable tanks allow for easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.


CS

The vertical oven mod. CS is suitable for all kinds of profiles. It is used in flash-off or drying processes with water-based products, solvent with or without UV cross-linking after spray, vacuum or curtain coating processes at high working speeds. It is available in different solutions depending on the length of the profile and the required drying time.


CS Spray

The CS painting booth is an ideal working environment for the manual finishing of various types of artefacts.
Pigments are captured by two vertical filtration stages.
Available in different sizes depending on the customer’s needs.

Related Products


Flow Coating

Flow Coating is a traditional vertical painting system for panels, door frames and components hanging from an overhead conveyor system. It is mainly used with water-based products such as impregnating products, intermediate fillers.
While the parts run through the Flow coating, two nozzle ramps positioned vertically on the left and right side spray a consistent flow of material that completely covers the surface of the part.

Related Products


Flow Line

The FlowLine impregnation machine is suitable for the application of impregnating products, intermediate filler (both transparent and pigmented) on frames, rods, matchboard, skirting boards, unassembled frames and linear profiles in general.
The product collection tank is removable to allow easier maintenance and the dry filtration tower ensures the removal of excess particulate.


G02/20

Top panel cleaner with one brush and a rotary blower.
The machine is suitable for cleaning the surface of panels, including edges, holes and milling after the sanding of a raw or primed panel, depending on the type of brush mounted.

Related Products


G02/23

The top and bottom panel cleaner G02/23 is a complete and functional model, which allows the removal of dust and processing residues from the top and bottom face of the panel, including the edges. The upper brush removes the dust and residues, while the rotary blower cleans the holes and millings. The bottom brush prevents processing residues from being transported with the part down the finishing line.


G02/24

The G02/24 panel cleaner, with one bottom and two top brushes, is a solid and versatile tool for the upper and lower cleaning of manufactured articles, including the edges.
The first upper brush allows the removal of dust and residues, while the second one cleans the pore. The lower brush prevents processing residues from being transported by the product to the finishing line.

Related Products


G02/26

The panel cleaner mod. G02/26 with three upper brushes and one lower brush is the most complete tool for upper and lower cleaning, including edges, of the products before finishing.
The first upper brush can be of a slightly abrasive material to allow the removal of particularly difficult slopes and to revive the previously polished surface. The lower brush prevents processing residues from being transported by the product to the finishing line.

Related Products