1VE-300

The 1VE spray machine for moldings with one tank is designed to finish wood, plastic and metal profiles.
The removable tank allows easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.

Related Products


2SF - 3SF - 4SF - 5SF

The automatic loaders for trolleys with fixed side mod. SF are used at the exit of the spray, curtain and vacuum finishing lines to load the pieces directly onto the trolleys without the aid of personnel.
Models in different sizes and different number of arms are available according to customer needs.


2VE-300

The 2VE spray machine for moldings with two tanks allows finishing of wood, plastic and metal profiles.
The two removable tanks allow for easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.


AC & AC/TL

The hot air laminating ovens are used to carry out a first flash off process of both solvent and water based products, in particular for spray, curtain coating or specific roller coating cycles.
This type of oven is configured in a modular way according to the type of product to be treated, application process and working speed. The type of ventilation and the quality of the air treatment are parameters that must be carefully evaluated according to the performance that is to be achieved. They can also be equipped with TL and GEL lamps for the gelling of UV coatings.


CS

The vertical oven mod. CS is suitable for all kinds of profiles. It is used in flash-off or drying processes with water-based products, solvent with or without UV cross-linking after spray, vacuum or curtain coating processes at high working speeds. It is available in different solutions depending on the length of the profile and the required drying time.


CS Spray

The CS painting booth is an ideal working environment for the manual finishing of various types of artefacts.
Pigments are captured by two vertical filtration stages.
Available in different sizes depending on the customer’s needs.

Related Products


ECD

The ECD edge coating machine is suitable for the application of 100% UV paints or water base stain on the edges of flat or shaped panels.
Taking advantage of the principle of the vacuum application, it allows the customer to achieve excellent results even on particular shapes or undercuts.
It is normally installed on a modular base integrating application and drying modules – hot air, IR or UV radiation. High application accuracy, working speed, easy set-up together with a high transfer efficiency make it the ideal solution for edge painting for medium-high production volumes.


Flow Coating

Flow Coating is a traditional vertical painting system for panels, door frames and components hanging from an overhead conveyor system. It is mainly used with water-based products such as impregnating products, intermediate fillers.
While the parts run through the Flow coating, two nozzle ramps positioned vertically on the left and right side spray a consistent flow of material that completely covers the surface of the part.


Flow Line

The FlowLine impregnation machine is suitable for the application of impregnating products, intermediate filler (both transparent and pigmented) on frames, rods, matchboard, skirting boards, unassembled frames and linear profiles in general.
The product collection tank is removable to allow easier maintenance and the dry filtration tower ensures the removal of excess particulate.


FVP 3000 5000

The Vertical oven for moldings mod. FV is the best solution for the flash off or drying of water-based products, solvent products with or without UV cross-linking after spray, vacuum or high speed curtain coating when long dwell times are required.
It is available in different solutions depending on the length of the profile and the drying time required.

Related Products