2SF - 3SF - 4SF - 5SF

The automatic loaders for trolleys with fixed side mod. SF are used at the exit of the spray, curtain and vacuum finishing lines to load the pieces directly onto the trolleys without the aid of personnel.
Models in different sizes and different number of arms are available according to customer needs.


AC & AC/TL

The hot air laminating ovens are used to carry out a first flash off process of both solvent and water based products, in particular for spray, curtain coating or specific roller coating cycles.
This type of oven is configured in a modular way according to the type of product to be treated, application process and working speed. The type of ventilation and the quality of the air treatment are parameters that must be carefully evaluated according to the performance that is to be achieved. They can also be equipped with TL and GEL lamps for the gelling of UV coatings.


ECD

The ECD edge coating machine is suitable for the application of 100% UV paints or water base stain on the edges of flat or shaped panels.
Taking advantage of the principle of the vacuum application, it allows the customer to achieve excellent results even on particular shapes or undercuts.
It is normally installed on a modular base integrating application and drying modules – hot air, IR or UV radiation. High application accuracy, working speed, easy set-up together with a high transfer efficiency make it the ideal solution for edge painting for medium-high production volumes.


Flow Line

The FlowLine impregnation machine is suitable for the application of impregnating products, intermediate filler (both transparent and pigmented) on frames, rods, matchboard, skirting boards, unassembled frames and linear profiles in general.
The product collection tank is removable to allow easier maintenance and the dry filtration tower ensures the removal of excess particulate.


G02/05

The G02/05 roller coater, with 3 independent speeds, allows the application of finishing products on any flat surfaces. The robust structure of the machine, made with 4 lifting jacks and a large rubber-coated conveyor roller makes it suitable for use in any working condition.


G02/05 HC

Roller coater with 3 independent speeds for high processing performances. The G02/05 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.
The machine is equipped with four lifting jacks, an applicator roller and a back-up roller with the same large diameter.

Related Products


G02/07

Roller coater with two coating rollers of which the second with reverse application.
The machine allows the application of high quantities of paint product on all flat surfaces with an excellent coverage of the applied product.

Related Products


G02/07 HC

Roller coater with two coating rollers of which the second with reverse application.
The machine allows the application of high quantities of paint product on all flat surfaces with an excellent coverage of the applied product.
The G02/07 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products


G02/08

The heavy filler G02/08 allows the application of UV and water base fillers or putty with low, medium and high viscosity on all flat surfaces.
The machine is equipped with a roller conveyor system, with large diameter back-up rollers and an emergency quick lifting system.


G02/08 HC

The plastering machine G02/08 HC is suitable for the application of low or high viscosity UV and water-base fillers and putty. The G02/08 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products