AC & AC/TL

The hot air laminating ovens are used to carry out a first flash off process of both solvent and water based products, in particular for spray, curtain coating or specific roller coating cycles.
This type of oven is configured in a modular way according to the type of product to be treated, application process and working speed. The type of ventilation and the quality of the air treatment are parameters that must be carefully evaluated according to the performance that is to be achieved. They can also be equipped with TL and GEL lamps for the gelling of UV coatings.


CS Spray

The CS painting booth is an ideal working environment for the manual finishing of various types of artefacts.
Pigments are captured by two vertical filtration stages.
Available in different sizes depending on the customer’s needs.

Related Products


G02/05 HC

Roller coater with 3 independent speeds for high processing performances. The G02/05 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.
The machine is equipped with four lifting jacks, an applicator roller and a back-up roller with the same large diameter.

Related Products


G02/07 HC

Roller coater with two coating rollers of which the second with reverse application.
The machine allows the application of high quantities of paint product on all flat surfaces with an excellent coverage of the applied product.
The G02/07 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products


G02/08 HC

The plastering machine G02/08 HC is suitable for the application of low or high viscosity UV and water-base fillers and putty. The G02/08 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products


G02/11 HC

The G02/11K printing machines guarantee high application performances. They are designed to be inserted in finishing lines in order to decorate flat panels with the application of special colors or designs. Up to four synchronized machines can be used for the application of different patterns.

Related Products


G02/30 S2

The G02/30-S2 denibber is used in finishing lines after roller or spray applications to even out and correctly distribute the applied product (stain and oil). Depending on the brushes installed in the machine, it can also be used as a machine for a light denibbing of the parts before application.

Related Products


G02ET

The machine allows the application of base and top coats on all flat surfaces. The machine is particularly suitable for high quality applications together with high performance both in terms of working speed and transfer efficiency of the coating product.
The curtain coater ET is available with one or two application heads. The peculiarity of this machine is the possibility to extract the application trolley (s) for easier maintenance and quick change of paint.


G02LT

The machine allows the application of base and top coats on all flat surfaces. The use is particularly suitable for high quality applications together with high performance both in terms of working speed and transfer efficiency of the coating product.

The curtain coater LT is available with one or two fixed trolleys.


GP Jet PLUS

The JET GP series of hot air high speed ovens use the high-speed hot air principle. The flow of hot air is channeled into the distribution chambers and then diffused on the manufactured articles by means of conical nozzles which accelerate the air speed, thus increasing its efficacy. The recirculating ventilation system allows considerable energy savings. The GP JET Oven is the best solution for the flash off and drying of water-based products, solvent products with or without UV cross-linking in spray, curtain coating or roller coating processes.
This type of oven can be configured as modules in relation to the speed of the painting process. They can also be equipped with IR lamps to further optimize drying.