1VE-300

The 1VE spray machine for moldings with one tank is designed to finish wood, plastic and metal profiles.
The removable tank allows easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.

Related Products


2VE-300

The 2VE spray machine for moldings with two tanks allows finishing of wood, plastic and metal profiles.
The two removable tanks allow for easy maintenance. The guns are equipped with an independent power supply circuit with spraying parameters managed via touch screen.


AC & AC/TL

The hot air laminating ovens are used to carry out a first flash off process of both solvent and water based products, in particular for spray, curtain coating or specific roller coating cycles.
This type of oven is configured in a modular way according to the type of product to be treated, application process and working speed. The type of ventilation and the quality of the air treatment are parameters that must be carefully evaluated according to the performance that is to be achieved. They can also be equipped with TL and GEL lamps for the gelling of UV coatings.


CS Spray

The CS painting booth is an ideal working environment for the manual finishing of various types of artefacts.
Pigments are captured by two vertical filtration stages.
Available in different sizes depending on the customer’s needs.

Related Products


G02/05

The G02/05 roller coater, with 3 independent speeds, allows the application of finishing products on any flat surfaces. The robust structure of the machine, made with 4 lifting jacks and a large rubber-coated conveyor roller makes it suitable for use in any working condition.


G02/05 HC

Roller coater with 3 independent speeds for high processing performances. The G02/05 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.
The machine is equipped with four lifting jacks, an applicator roller and a back-up roller with the same large diameter.

Related Products


G02/07

Roller coater with two coating rollers of which the second with reverse application.
The machine allows the application of high quantities of paint product on all flat surfaces with an excellent coverage of the applied product.

Related Products


G02/07 HC

Roller coater with two coating rollers of which the second with reverse application.
The machine allows the application of high quantities of paint product on all flat surfaces with an excellent coverage of the applied product.
The G02/07 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products


G02/08

The heavy filler G02/08 allows the application of UV and water base fillers or putty with low, medium and high viscosity on all flat surfaces.
The machine is equipped with a roller conveyor system, with large diameter back-up rollers and an emergency quick lifting system.


G02/08 HC

The plastering machine G02/08 HC is suitable for the application of low or high viscosity UV and water-base fillers and putty. The G02/08 HC is made with technological solutions that allow it to be used in continuous work cycles 24/24 and 7/7.

Related Products